Hot dip galvanising line
In order to protect steel against corrosion, we apply a thin zinc layer. This can be done in one of our hot dip galvanising lines where galvanised products are manufactured for construction, the packaging industry and the automotive industry.
How does this work?
In the hot dip galvanising line, we first degrease and heat the cold rolled strip before further treatment. This ensures an optimum adhesion for the zinc particles.
The strip is then heated to 700/800° C before being cooled down to 460°C. The strip is guided into a zinc bath, which is also 460° C.
When exiting the zinc bath, the zinc layer is blown off by air wipers until the desired coat thickness is reached. The strip is now cooled.
The deformation behaviour and the flatness of the strip can be further optimised by means of a temper rolling stand and a stretch-leveller.
Next we apply a chromate layer onto the strip to prevent ‘white rust’ (caused by the oxidation of the zinc coating).
The final step is to inspect the steel strip, to oil it, cut it at desired length and to coil it.
- Raw materials
- Coking plant
- Sinter plant
- Blast furnace
- Steel shop
- Hot strip mill
- Coll rolling mill
- Jet vapor deposition